使用脚本自动修改ip设置

2020-06-26 17:43:41

字体：大中小

来源：转载

供稿：网友

这篇文章专为想通过脚本修改ip地址的朋友准备的，第一个bat是测试通过的也比较实用，vbs一般也是通过netsh命令实现，当然也可以不通过netsh实现，具体的大家自行参考下吧

vbs脚本的功能非常强大，管理系统简单方便！下面的脚本win2000和winxp都可以使用，win2003没有测试过，应该也没有问题。如果需要经常切换网关，或是ip，这个脚本是最方便的了。稍微修改一下甚至可以做到1分钟变一次ip。

复制代码代码如下:

@Echo Off
TITLE VEVB武林网ip设置器

:start
CLS
COLOR 2f
:: 使用COLOR命令对控制台输出颜色进行更改
mode con cols=56 lines=20
:: MODE语句为设定窗体的宽和高
:sc_main
echo       -------------------------------------------
echo.&echo.
echo             0.192.168.0.99 & echo.
echo             1.192.168.1.99 & echo.
echo             q.退出 & echo.&echo.&echo.&echo.&echo.&echo.

set "select="
set/p select= 输入数字，按回车继续 :
if "%select%"=="0" (goto sc_ip0)
if "%select%"=="1" (goto sc_ip1)
if "%select%"=="Q" (goto sc_exit)

:sc_exit
exit
goto :eof

:sc_ip0
cls
echo 正在设置中，请稍候
Netsh interface IP Set Address "本地连接" Static 192.168.0.99 255.255.255.0 192.168.0.1 1
Netsh interface IP set dns "本地连接" static 192.168.0.1 primary
echo 设置成功 192.168.0.99
PAUSE >nul
Goto sc_main
:sc_ip1
cls
echo 正在设置中，请稍候
Netsh interface IP Set Address "本地连接" Static 192.168.1.99 255.255.255.0 192.168.1.1 1
Netsh interface IP set dns "本地连接" static 192.168.1.1 primary
echo 设置成功 192.168.1.99
PAUSE >nul
Goto sc_main

vbs修改ip

复制代码代码如下:

changeip.vbsstrComputer = "."
Set objWMIService = GetObject("winmgmts://" & strComputer & "/root/cimv2")
Set colNetAdapters = objWMIService.ExecQuery _
("Select * from Win32_NetworkAdapterConfiguration where IPEnabled=TRUE")

For Each objNetAdapter in colNetAdapters
sip=objNetAdapter.IPAddress
strIPAddress = sip '保持原来的ip，如果需要修改ip为192.168.0.200：strIPAddress = Array("192.168.0.200")
strSubnetMask = Array("255.255.255.0")
strGateway = Array("192.168.0.254") '修改网关为192.168.0.254
strGatewayMetric = Array(1)

    errEnable = objNetAdapter.EnableStatic(strIPAddress, strSubnetMask)
    errGateways = objNetAdapter.SetGateways(strGateway, strGatewaymetric)
    If errEnable = 0 Then
        WScript.Echo "The IP address has been changed."
    Else
        WScript.Echo "The IP address could not be changed."
    End If
    exit for      '只修改第一个网卡的设置
Next

VBS修改IP

复制代码代码如下:

'VBS修改IP
function transh(s)
if isnumeric(s) then
if len(s)=1 then
   transh="00" & s
elseif len(s)=2 then
   transh="0" & s
elseif len(s)=3 then
   transh=s
end if
else
   transh=""
end if
end function
dim head
'机器名头
head="B"
'ip头
iphead="192.168.131"
ipgate="192.168.131"

dim i
i=inputbox("输入机器序号(2-254)")
if i="" then
msgbox "Error: 序号不正确！"
else
dim shell
set shell = CreateObject("WScript.Shell")

'修改计算机名
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Control/ComputerName/ComputerName/ComputerName", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/NV Hostname", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/Hostname", head & transh(i) ,"REG_SZ"
'修改IP
shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
end if