写个设置命令的VBS脚本代码

'作者：刘先勇 (Eric Liu) 
'将以下代码复制并保存为"系统命令.VBS"，并运行安装。 
'安装成功后，可通过在程序、文件或文件夹上点右键->发送到->系统命令来设置一个命令，然后在运行中就可以输入该命令打开文件了。 
'脚本运行一次后在右键菜单中增加从这里运行CMD的快捷方式，还增加查找目标文件快捷方式 

'On Error Resume Next 
If (lcase(right(wscript.fullname,11))<>"wscript.exe") then 
set objShell=createObject("wscript.shell") 
objShell.Run("Wscript //nologo "&chr(34)&wscript.scriptfullname&chr(34)) 
Wscript.Quit 
end if 

Set pCmd=CreateObject("WScript.Shell") 
Set pFso=CreateObject("Scripting.FileSystemObject") 
Set pShell = CreateObject("Shell.Application") 
Set pSysEnv = CreateObject("WScript.Shell").Environment("system") 
strComputer = "." 
Set pWMIService = GetObject("winmgmts://" & strComputer & "/root/cimv2") 

Function LGetPath(pFile) 
iLastSepPos = InstrRev(pFile, "/", -1, 1) 
If iLastSepPos <= 0 Then 
LGetPath="" 
Exit Function 
Else 
LGetPath = Left(pFile, iLastSepPos-1) 
End If 
End Function 

Function GetLnkTarget(linkPath) 
linkPath=Replace(linkPath, "/", "//") 
Set pFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " & "'" & linkPath & "'") 
For Each pFile in pFiles 
GetLnkTarget=pFile.Target 
Exit For 
Next 
End Function 

Function ListSysCmd(pFileName) 
SysCmdPath=pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") 
Set pFolder = pFso.GetFolder(SysCmdPath) 
Set pFile = pFso.OpenTextFile(pFileName, 2, True) 

For Each file in pFolder.Files 
linkPath=SysCmdPath & "/" & file.name 
IF UCASE(Right(file.name, 4))=".LNK" Then 
Set lnkFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " & "'" & Replace(linkPath, "/", "//") & "'") 
For Each lnkFile in lnkFiles 
pFile.WriteLine(linkPath & " " & lnkFile.Target) 
Next 
Else 
pFile.WriteLine linkPath 
End IF 
Next 
End Function 

Function GetConfigPath 
Set pFolder = pShell.BrowseForFolder(0, "请选择一个目录:", 0, "::{20D04FE0-3AEA-1069-A2D8-08002B30309D}") 
If pFolder Is Nothing Then 
Wscript.Quit 
End If 
Set pFolderItem = pFolder.Self 
GetConfigPath = pFolderItem.Path 
End Function 

Sub SetEnv(pPath, pValue) 
If pValue="" Then 
pSysEnv.Remove(pPath) 
Else 
pSysEnv(pPath) = pValue 
End IF 
End Sub 

Function GetEnv(pPath) 
GetEnv = pSysEnv(pPath) 
End Function 

'判断一个字符串是否匹配一个正则表达式 
' ^/w+[@]/w+[.]/w+$ E-Mail地址 
' ^[0-9-]+$ 数字 
Function IsMatch(Str, Patrn) 
Set r = new RegExp 
r.Pattern = Patrn 
IsMatch = r.test(Str) 
End Function 

Sub AddNewCmd(pShortCutName, pTargetPath, pCmdLocation) 
IF pShortCutName<>"" Then 
LinkDir = pCmdLocation 
Set pCmdLink = pCmd.CreateShortcut(LinkDir & "/" & pShortCutName & ".lnk") 
pCmdLink.TargetPath = pTargetPath 
pCmdLink.WindowStyle = 1 
pCmdLink.Hotkey = "" 
pCmdLink.IconLocation = "%systemroot%/system32/shell32.dll,146" 
pCmdLink.Description = "Shortcut Created At " & Date() & " " & Time() 
pCmdLink.WorkingDirectory = LGetPath(pTargetPath) 
pCmdLink.Save 
End IF 
End Sub 

Set pArgs=Wscript.Arguments 
If pArgs.Count = 0 Then '无参运行，复制自身到SendTo文件夹。 

MsgBox "注意无参运行即执行安装过程！" & VBCRLF & _ 
"安装过程包括以下操作：" & VBCRLF & VBCRLF & _ 
"1、在发送到目录中建立该脚本的快捷方式；" & VBCRLF & _ 
"2、完成安装后可通过发送到建立快捷方式；" & VBCRLF & _ 
"3、所有快捷命令可通过运行(WIN+R)执行。" & VBCRLF 
SysCmdPath = GetConfigPath 
If SysCmdPath = "" Then WScript.Quit() 

pCmd.RegWrite "HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd", SysCmdPath, "REG_SZ" 
'Path = pCmd.RegRead("HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Control/Session Manager/Environment/Path") 
Path = GetEnv("Path") 

If Right(SysCmdPath, 1)="/" Then SysCmdPath = Left(SysCmdPath, Len(SysCmdPath)-1) 
SysCmdPathPattern ="(;)?(" & Replace(SysCmdPath, "/", "//") & ")(//)?(;|$)" 
If Not IsMatch(Path, SysCmdPathPattern) Then 
Path = Path & ";" & SysCmdPath 
SetEnv "Path", Path 
End If 

thisFile = WScript.ScriptFullName 
IF thisFile<>SysCmdPath & "/" & WScript.ScriptName Then 
pFso.CopyFile thisFile, SysCmdPath & "/" 
thisFile = SysCmdPath & "/" & WScript.ScriptName 
End IF 

AddNewCmd "N系统命令", thisFile, pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SendTo") 
'在右键菜单中增加创建当前文件或文件夹的系统快捷命令的菜单项 
pCmd.RegWrite "HKEY_CLASSES_ROOT/*/shell/G创建系统命令/command/", "WScript.exe " & thisFile & " ""%1""", "REG_SZ" 
pCmd.RegWrite "HKEY_CLASSES_ROOT/Directory/shell/G创建系统命令/command/", "WScript.exe " & thisFile & " ""%1""", "REG_SZ" 
'在右键菜单中增加在当前路径打开CMD窗口命令的菜单项 
pCmd.RegWrite "HKEY_CLASSES_ROOT/*/shell/Q在此打开CMD/command/", "CMD /K PUSHD ""%1//..""", "REG_SZ" 
pCmd.RegWrite "HKEY_CLASSES_ROOT/Directory/shell/Q在此打开CMD/command/", "CMD /K PUSHD ""%1""", "REG_SZ" 

'在右键菜单中增加在查找快捷方式位置的菜单项 
pCmd.RegWrite "HKEY_CLASSES_ROOT/*/shell/W查找目标位置/command/", "WScript.exe " & thisFile & " S ""%1""", "REG_SZ" 
pCmd.RegWrite "HKEY_CLASSES_ROOT/Directory/shell/W查找目标位置/command/", "WScript.exe " & thisFile & " S ""%1""", "REG_SZ" 

AddNewCmd "Q", pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd"), pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") 
AddNewCmd "QC", thisFile, pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") 
MsgBox "安装成功!" 
ElseIf pArgs.Count = 1 Then 
IF UCase(pArgs(0))="EDIT" Then '只有一个参数且为Edit时， 打开此脚本进行编辑。 
pCmd.Run("Notepad.exe " & WScript.ScriptFullName) 
WScript.Quit() 
ElseIF UCase(pArgs(0))="LIST" Then '只有一个参数且为List时， 列出所有已经建立的快捷方式和其对应的目标文件。 
ResultFile=pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") & "/ListSysCmd.txt" 
ListSysCmd ResultFile 
pCmd.Run("Notepad.exe " & ResultFile) 
WScript.Quit() 
Else '只有一个参数时， 默认处理方式是建立传入的文件路径的快捷方式。 
pShortCutName=InputBox("请输入该快捷方式的名字：", "创建快捷命令...", "") 
IF pShortCutName="" Then WScript.Quit() 
AddNewCmd pShortCutName, pArgs(0), pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") 
End IF 
ElseIf pArgs.Count = 2 Then 
IF UCase(pArgs(0))="S" Then '查找快捷方式目标文件位置 
'判断是否包括/，从右键菜单执行会直接传递目标地址，从快捷方式中需要组合快捷方式的地址。 
IF Instr(pArgs(1), "/") > 0 And Instr(pArgs(1), ".lnk") = 0 Then '从右键菜单执行 
pCmd.Run("Explorer.exe /select, " & pArgs(1)) 
Else '从命令行执行 
IF Instr(pArgs(1), "/") > 0 Then '全路径.lnk路径 
linkPath=pArgs(1) 
Else 
linkPath=pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") & "/" & pArgs(1) & ".lnk" 
End IF 
linkPath=Replace(linkPath, "/", "//") 
Set pFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " & "'" & linkPath & "'") 
For Each pFile in pFiles 
pCmd.Run("Explorer.exe /n, /select, " & pFile.Target) 
Next 
End IF 
Else 
'FileLocation, ShortCutName 
pShortCutName=pArgs(1) 
AddNewCmd pShortCutName, pArgs(0), pCmd.RegRead("HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/SysCmd") 
End IF 
End If