使用Python3+PyQT5+Pyserial 实现简单的串口工具方法

练手项目，先上图

先实现一个简单的串口工具，为之后的上位机做准备

代码如下：

github 下载地址

pyserial_demo.py

import sysimport serialimport serial.tools.list_portsfrom PyQt5 import QtWidgetsfrom PyQt5.QtWidgets import QMessageBoxfrom PyQt5.QtCore import QTimerfrom ui_demo_1 import Ui_Formclass Pyqt5_Serial(QtWidgets.QWidget, Ui_Form):  def __init__(self):    super(Pyqt5_Serial, self).__init__()    self.setupUi(self)    self.init()    self.setWindowTitle("串口小助手")    self.ser = serial.Serial()    self.port_check()    # 接收数据和发送数据数目置零    self.data_num_received = 0    self.lineEdit.setText(str(self.data_num_received))    self.data_num_sended = 0    self.lineEdit_2.setText(str(self.data_num_sended))  def init(self):    # 串口检测按钮    self.s1__box_1.clicked.connect(self.port_check)    # 串口信息显示    self.s1__box_2.currentTextChanged.connect(self.port_imf)    # 打开串口按钮    self.open_button.clicked.connect(self.port_open)    # 关闭串口按钮    self.close_button.clicked.connect(self.port_close)    # 发送数据按钮    self.s3__send_button.clicked.connect(self.data_send)    # 定时发送数据    self.timer_send = QTimer()    self.timer_send.timeout.connect(self.data_send)    self.timer_send_cb.stateChanged.connect(self.data_send_timer)    # 定时器接收数据    self.timer = QTimer(self)    self.timer.timeout.connect(self.data_receive)    # 清除发送窗口    self.s3__clear_button.clicked.connect(self.send_data_clear)    # 清除接收窗口    self.s2__clear_button.clicked.connect(self.receive_data_clear)  # 串口检测  def port_check(self):    # 检测所有存在的串口，将信息存储在字典中    self.Com_Dict = {}    port_list = list(serial.tools.list_ports.comports())    self.s1__box_2.clear()    for port in port_list:      self.Com_Dict["%s" % port[0]] = "%s" % port[1]      self.s1__box_2.addItem(port[0])    if len(self.Com_Dict) == 0:      self.state_label.setText(" 无串口")  # 串口信息  def port_imf(self):    # 显示选定的串口的详细信息    imf_s = self.s1__box_2.currentText()    if imf_s != "":      self.state_label.setText(self.Com_Dict[self.s1__box_2.currentText()])  # 打开串口  def port_open(self):    self.ser.port = self.s1__box_2.currentText()    self.ser.baudrate = int(self.s1__box_3.currentText())    self.ser.bytesize = int(self.s1__box_4.currentText())    self.ser.stopbits = int(self.s1__box_6.currentText())    self.ser.parity = self.s1__box_5.currentText()    try:      self.ser.open()    except:      QMessageBox.critical(self, "Port Error", "此串口不能被打开！")      return None    # 打开串口接收定时器，周期为2ms    self.timer.start(2)    if self.ser.isOpen():      self.open_button.setEnabled(False)      self.close_button.setEnabled(True)      self.formGroupBox1.setTitle("串口状态（已开启）")  # 关闭串口  def port_close(self):    self.timer.stop()    self.timer_send.stop()    try:      self.ser.close()    except:      pass    self.open_button.setEnabled(True)    self.close_button.setEnabled(False)    self.lineEdit_3.setEnabled(True)    # 接收数据和发送数据数目置零    self.data_num_received = 0    self.lineEdit.setText(str(self.data_num_received))    self.data_num_sended = 0    self.lineEdit_2.setText(str(self.data_num_sended))    self.formGroupBox1.setTitle("串口状态（已关闭）")  # 发送数据  def data_send(self):    if self.ser.isOpen():      input_s = self.s3__send_text.toPlainText()      if input_s != "":        # 非空字符串        if self.hex_send.isChecked():          # hex发送          input_s = input_s.strip()          send_list = []          while input_s != '':            try:              num = int(input_s[0:2], 16)            except ValueError:              QMessageBox.critical(self, 'wrong data', '请输入十六进制数据，以空格分开!')              return None            input_s = input_s[2:].strip()            send_list.append(num)          input_s = bytes(send_list)        else:          # ascii发送          input_s = (input_s + '/r/n').encode('utf-8')        num = self.ser.write(input_s)        self.data_num_sended += num        self.lineEdit_2.setText(str(self.data_num_sended))    else:      pass  # 接收数据  def data_receive(self):    try:      num = self.ser.inWaiting()    except:      self.port_close()      return None    if num > 0:      data = self.ser.read(num)      num = len(data)      # hex显示      if self.hex_receive.checkState():        out_s = ''        for i in range(0, len(data)):          out_s = out_s + '{:02X}'.format(data[i]) + ' '        self.s2__receive_text.insertPlainText(out_s)      else:        # 串口接收到的字符串为b'123',要转化成unicode字符串才能输出到窗口中去        self.s2__receive_text.insertPlainText(data.decode('iso-8859-1'))      # 统计接收字符的数量      self.data_num_received += num      self.lineEdit.setText(str(self.data_num_received))      # 获取到text光标      textCursor = self.s2__receive_text.textCursor()      # 滚动到底部      textCursor.movePosition(textCursor.End)      # 设置光标到text中去      self.s2__receive_text.setTextCursor(textCursor)    else:      pass  # 定时发送数据  def data_send_timer(self):    if self.timer_send_cb.isChecked():      self.timer_send.start(int(self.lineEdit_3.text()))      self.lineEdit_3.setEnabled(False)    else:      self.timer_send.stop()      self.lineEdit_3.setEnabled(True)  # 清除显示  def send_data_clear(self):    self.s3__send_text.setText("")  def receive_data_clear(self):    self.s2__receive_text.setText("")if __name__ == '__main__':  app = QtWidgets.QApplication(sys.argv)  myshow = Pyqt5_Serial()  myshow.show()  sys.exit(app.exec_())